Installing the best ceiling fan with lights can be intimidating. If you can call a professional to install it well, good for you. However, if you can’t find help or you just prefer to DIY, there are a couple of things to keep in mind to keep the entire installation process safe and effectively brings you closer to your goal of getting the unit up.
This guide will provide you with the basic steps you need to know about how to install a ceiling fan with lights quickly. However, it’s very important that you also check these instructions closely against the assembly guide that comes with your product. It’s vital for you to keep in mind that different products may have to be installed differently in some ways.
Step-By-Step Instructions on “How to Install a Ceiling Fan with Lights”
Are you ready to get going with the installation process but still not sure how to install a ceiling fan with lights? Do not worry.
If you have yet to buy a product, please check out the best ceiling fan with lights product review and buying guide.
The following easy-to-follow steps will see you through installing the best ceiling fan with lights within a short time.
Step 1: Switch off the circuit
Turn off the circuit for lighting that connects power to the point you plan to install the ceiling fan. Test if electricity is still flowing through by holding a non-contact voltage sensor close to your ceiling junction box. If the sensor flashes and sounds an alarm, there is always an electric charge still flowing. Do not touch the naked wires until you disconnect the flow completely.
Step 2: Check the installation area
At this point, you want to make sure you check on the integrity of the ceiling joint. This is important because those brackets in the ceiling will help support the weight of your ceiling fan, and keep it from falling, swinging erratically, and making annoying noise when it’s running.
If you have anything already installed where you want your ceiling fan, simply remove the unit and the mounting bracket in the ceiling. Then, take the ceiling fan’s mounting brackets and attach them to the ceiling’s junction box using the mounting screws supplied by the seller.
In case you’re installing on high-ceiling, you should take the extension wiring and clip it on, and use the down-rod also supplied with your unit to hide the extension wires. For more specific instructions, check the assembly guide provided by the manufacturer.
Step 3: Set the mount in place
Pass the four wires linked to the top of your ceiling fan’s motor inside the canopy. Place the canopy on top of the fan’s motor. Moreover, you want to make sure that the broader end is facing the ceiling. Then, run-through the ceiling fan’s wires around the down-rod and put the rod into the collar situated atop the ceiling fan.
Step 4: Bring up the fan motor
Align the round openings belonging to the down-rod with the two round slots present in the collar. Now, it’s time to get your fan base up and hang it on the mount. Make sure it is locked and secured well into the mount.
At this stage, you are almost entirely hacking the process of how to install a ceiling fan with lights.
Step 5: Connect the wiring
This next step involves connecting the wires from the ceiling joint and the wires sticking out of the base of the motor unit or, the down-rod if you used one. Generally, you will need to strip off the wire coverings to show the copper inside. Then, twist wires that need to be connected together. Once you’ve linked the wires, cover the wires using the shroud.
It cannot be stressed enough that you should check the product manual for a more detailed guide of which wires you should be clipping together. Then follow the instructions down to the tee. Wiring connections can differ across products so make sure to follow the manual instructions correctly.
Step 6: Cover the wirings
There may be other pieces supplied that are intended to hide the wires and screws. So, make sure not to miss those pieces and take the step to cover the wirings to keep your unit attractive.
Step 7: Assemble the fan blades
Leave the ceiling and the motor base for a while to assemble the fan blades. Once done, attach each blade to the motor base. Secure it by tightening the screws provided by the manufacturer.
Step 8: Connect the light kit
Again, at this point, you should closely refer to the product manual to know which wires should be connected to the light kit. Generally, you will be linking wires then covering up the wires just like what you just did with the motor base. Use the light kit screws to attach the light kit below the switch housing.
Step 9: Attach the lights
Add the glass shades to the ceiling fan, then tighten the thumbscrews to secure the shades firmly to the light kit. Next, put a light bulb into each socket inside the glass shade.
Step 10: Test
Turn on the unit to check if the fan and lights are working as intended.
If you need to make adjustments, don’t forget to switch off the circuit once again. Never touch the wires unless you are certain that the power has been cut off.
Frequently Asked Questions (FAQs)
How to install a ceiling fan with lights? Is it easy?
Installing a ceiling fan with lights can’t be more challenging than following the manual or a stepwise guide like this article. However, it is a daunting task if you lack the necessary tools and knowledge of how to install a ceiling fan with lights.
Can a ceiling fan cause cracks in my ceiling?
Not really. A ceiling fan will hardly be the cause of cracks on your ceiling. It might just amplify a weakness that already existed on your ceiling, which could have been caused by other reasons like foundation problems.
Don’t miss that part in this guide on how to install a ceiling fan which stresses you check on the integrity of your ceiling joints. You should install your unit where a joint is located to keep the product from damaging your ceiling or even from falling off the ceiling
How much does it cost to have a ceiling fan with lights installed?
Knowing how to install a ceiling fan will save you a lot of installation costs. On average, the whole installation process should cost about $250 when you hire a handyman to do the job, and likely more if you hire a contractor.
Conclusion
Anybody can learn how to install a ceiling fan with lights. In any case, you may need at least one other person to assist you. Simply following this guide, coupled with closely following the manufacturer’s instructions, can save you a significant sum of money.
In addition, there’s a different level of satisfaction you feel when you see the unit working just like it’s supposed to and knowing that you didn’t need professional help to accomplish that. Follow this guide and your unit should be up and running in under an hour — probably even less. Well done!
If you’d like to know more about how lighting can dramatically transform your spaces with ease, check out the Do’s and Dont’s of Lighting. For more lighting inspiration for your bedroom, check out the best bedroom lighting ideas.
Looking at this article, I miss the time when I didn’t wear a mask. baccarat online Hopefully this corona will end soon. My blog is a blog that mainly posts pictures of daily life before Corona and landscapes at that time. If you want to remember that time again, please visit us.