Check out the top 10 best jumper cables in 2019. Our automotive expert made a shortlist after lengthy research. When your car battery is discharged or is running out of its power, you cannot start your car.
You need to recharge your car battery or replace it with the new one. But, if you are in the middle of nowhere, there is no option unless you get some help from other cars.
So, you can start your car engine using other car batteries. Somehow, you need jumper cables to connect your car to the other’s car battery.
What is actually a jumper cable? A jumper cable is actually an electrical cable that has a length of 5 meters up t 10 meters that you can use to start your car from other car’s batteries.
Usually, a pair of jumper cables have a red and black cord, and they have clamps on each side.
It is essential always to bring a pair of jumper cables in your car if you worry about running out of battery. When your battery is running out, you can get some help from other cars to start the engine using the jumper cable.
To use the jumper cable, you only have to connect the red wire to the positive clamp of the active battery to your dead battery clamp on your car. Evidently, Jumpstarter cable is an essential component like a torque wrench.
Editor’s Choice for the best jumper cable for your vehicle
|NoOne Heavy Duty|
Then, the black wire is connected to the negative clamp and then compare it to the car body.
Anyway, you can actually buy these jumper cables just in case you want to have them. But, you may need to know the best jumper cables to purchase. Here are a few jumper cables that are available for sales with their features.
To check the top quality steering stabilizer on the market you can visit our review.
10 Best Jumper Cables Review
01. CARTMAN 4 Gauge Booster Cable With Carry Bag 20 ft
CARTMAN is one of the trusted brands in the world that provides jumper cable products. You can choose Catman booster cable that has 4 gauge thickness and 20 ft in carrying bag.
There are a few features that you can get from this Cartman booster cable such as the clamping surface is covered by a plastic material to avoid short circuit, so it is safe to hold it.
Moreover, it is also straightforward to use because you can press the clamp to open it easily.
The cable material uses T-neoprene coating, so you can easily roll it and store it in the case. It is perfect for heavy-duty because it has no-tangle cable construction.
Not only that, but the Cartman booster cable also has a large tongue that is suitable for any kind of battery.
For the use, it is very simple and easy to hook up either side to side hook up, front to front hook up, front to back hook up, or front to back hook up.
02. EPAuto 4 Gauge Booster Jumper Cables Including Travel Bag & Safety Gloves (20 Feet)
The next best choice of jumper cable is EPAuto Duty Booster Jumper Cables with Travel Bag and Safety Gloves.
This jumper cable is designed with 4 gauge thickness and has a length of 20 ft. This jumper cable is suitable for heavy-duty. So, if you have a dead battery in the middle of nowhere, you can use this long jumper cable to start your car engine.
It is also easy to carry because you will also get a travel bag when buying it. You also get a free gloves pair for safety.
This cable also has no tangle, and it is designed with high-quality copper-plated clamps. The clamps are also covered with safe plastic materials to avoid any short circuits.
The clamp mouth is large enough, and it is suitable for any Accu batteries. As usual, this jumper cable has red and black colors, and the cables are also coated with an elastic material. So, after you use this cable, you can easily roll it and then store it in the travel bag.
03. Energizer 1 Heavy Duty Jumper Battery Cables 25 Ft
Energize is another booster jump start cable that offers 1-Gauge 800A Heavy Duty Jumper Battery Cables.
This booster cable only has 1 gauge thickness, but it is suitable for heavy-duty 800A. In addition, the cable is also long enough, with a length of 25 ft.
It is longer than the previous products and suitable for any vehicles. Since it has a long enough cable, so you can boost your car from any side. In addition, it also has no tangle, and the cable quality is made from the copper clad aluminum cable, which is quite flexible even when it is put in a temperature under -30-degree Celcius. When buying this cable, you also get a travel bag to store the cable after using it.
04. OxGord Commercial Grade Jumper Cable 4 Gauge 25 Feet
OxGord also a trusted booster starter jump cable manufacturer that offers 4 gauge thickness x 25 ft jumper cable. It is also perfect to use to start a dead car because it has a long enough cable. With 25 ft cable, you can jump-start your car from any side.
It is also suitable for heavy-duty 500A. When buying this OxGord booster cable, you will get a travel bag with copper-coated aluminum to avoid any tangling when you put it in your car trunk.
Meanwhile, the quality of its cable is good enough with a thermoplastic rubber coating that you can still use up to -40-degree Celcius.
It is known to be so much durable thanks to the dual construction and stronger grip copper teeth.
05. ABN Jumper Cables
If you are looking for an excellent commercial, automotive booster cable, ABN jumper cables must be your best choice.
The ABN booster cable is designed with 25 feet long and has 2 gauge thickness. It is also perfect for heavy-duty 600A. Basically, this cable looks ordinary and straightforward due to its clamps design.
Somehow, this jumper cable is easy to use with red and black color. The quality of the cable material is promising because it is made from solid copper clamps with healthy teeth.
The tip of the clamp is also covered with rubber coating for safety. Not only that, but it is also designed with high tension parrot clamps and the cable is also coated with good rubber material for a non-slip grip.
06. Amazonbasics Jumper Cable
Amazonbasics booster Cable can be a great choice if you really want to have a simple cable that is not too long and has 10 gauge thickness.
This 10 gauge booster cable can be used to start a dead car battery, and it is also already UL certified. It is not good for large vehicles, but it is suitable for small or compact cars.
Though it has a minimalist design, it is still suitable for heavy-duty 110A. Meanwhile, the quality of the cable is also good enough, and it is also flexible.
Basically, it looks like other jumper cables, but it is a bit shorter. In addition, it also has a strong spring, and you can also use it easily with a comfortable handle. When buying this jumper cable, you also get a travel bag to keep it safe.
07. Iron Forge Tools 20 ft
Another best jumper cable that has a long enough cable goes to Iron Forge Tools 20 Foot Jumper Cables.
This jumper cable is designed with 2 gauge thickness and suitable for heavy-duty 500A. The 20 ft long cable can be used from any side of the car. In addition, the design of the cable can resist in all weather climates.
It is also not only suitable for a small car, but it is also ideal for large vehicles, trucks, tractors, and etc. Moreover, it is also designed with free tangle for easy usage.
The cable is also made from good material and it is flexible. The cable is also coated with high-quality rubber material The clamps are designed with a safety coating to prevent it from short circuit.
08. TOPDC Jumper Cable
TOPDC is also a good choice if you want to have such a long booster cable that you can always bring it in the car. The TOPDC cable is designed with 4 gauge thickness and has 20 ft long.
It has excellent performance with CCA quality. It is effortless to use this booster jumper to start cable to transfer power from one battery to another batteries.
The cable itself is also PVC insulted that can keep it flexible despite you put in at a shallow temperature. It is also suitable for heavy-duty 200A with no-tangle design.
It has strong clamps with alligator mouth design. With this cable, you can use it to start a dead car, vans, motorcycle, and other vehicles. This cable also has a special travel bag to keep it safe.
09. Pennzoil Jumper Cable
Pennzoil jumper cable can be another long booster battery cable that is suitable for easy duty. It also comes with various sizes and lengths.
Just like other popular jumper booster cables, it is also designed with no tangle. When buying this cable, you also get a dedicated carry case to store the cable.
In addition, you can also use this cable for any cars. You do not need to doubt the quality. The cable is not only lengthy, but it also has a good coating.
The clamps are also comfortable to grip with a safety cover to protect your hand. Meanwhile, the clamp mouth also has a strong crocodile that can hold up the terminal perfectly.
10. NoOne Heavy Duty Booster Jumper Cable
The last choice of the best jumper cable to start your car battery is coming from the NoOne brand. This booster cable is designed with 12 ft long and has 6 gauge thickness.
Like other jumper cables, it is also suitable for heavy-duty 400A. It is easy to use & also fast with a secure connection.
Simply, you can connect the clamps to the battery, and it will start your engine in a short time. Of course, it is suitable for any vehicle too.
One of the best parts that you can only find on this cable is the LED light on each clamp. It is instrumental when you use the wire in the dark.
Meanwhile, the material is also high quality made from the best quality of PVC and sufficient CCA. The most important part is the alligator clamps that can work powerfully to bite the terminals.
Buying Considerations of Best Jumper Cable
Since there are a lot of jumper cables products available for sale, they make you confused about buying them. What do you need to know before buying a pair of jumper cables?
Even though jumper cables only consist of wires and clamps, you still need to consider a few things before buying. Read these following things think when purchasing jumper cables.
Choose jumper cables based on the wire gauge
Maybe, you have no idea what measure is why it is essential to consider. Well, gauge actually refers to the thickness of the wire to know whether the cable has a good quality or not.
The thickness itself is measured by numbers. For instance, 2 gauge, 4 gauge, or 6 gauge.
So, which one is the best thickness? When choosing a jumper cable gauge, it also depends on the use. If you want to jump-start a truck, 2 gauge and 4 gauge may be the right choice. You should not choose 10 gauge, but the lower number can be the best choice because it has a thicker wire.
Consider the thickness of the jumper cables
The width of the jumper cables is also necessary because you are about to choose the best jumper cables which are durable and reliable. It is not only about the thickness of the wire, but also the overall cable thickness, including the rubber coating.
You may see on each product with a label “heavy-duty,” but it is not totally accurate. The heavy-duty depends on the thickness of the wire gauge. Meanwhile, the overall cable thickness will influence the durability of the cable.
If you choose thin cables, then the wires will not last for a long time. The wire may come out of the rubber coating, and it is dangerous to use.
Choose the cables that can work on heavy-duty
What does heavy-duty mean? Some jumper cables can work on heavy-duty, which means that you can use them on high voltage. For example, some jumper booster cables are designed with 4 gauge and can work on 400 A.
In this case, the cables may only withstand the electricity up to 400 amperes at maximum. So, you have been confirming and make sure that the source power should be 400A in the ceiling.
If you connect to 500A or higher source power, it may damage the cable. Therefore, before you buy jumper cables, you have to check the heavy-duty capability or the gauge number.
Check the clamps of the booster jumper cable
It is also essential to check the quality of the braces before buying a jumper booster cable. In this case, you need to choose jumper cables that have heavy-duty clamps.
In addition, you also have to check the teeth. A booster cable with alligator teeth is the best choice because it can hold up battery terminals firmly and well.
You can try it on your thumb to know how strong the clamp is. It has to bite the terminal. It is also essential to check the clamps coating.
It is better if you choose a clamp that is entirely covered with plastic or rubber material, except the teeth. This can prevent it from short circuit and electric shock.
Choose jumper cables based on the cable length
There are some jumper cable products that have some different lengths.
You can choose either 12 feet, 20 feet, or 25 feet. It is better to choose the longer one despite the fact that it is a bit pricy. Perhaps, 20 ft jumper cable is good enough for any cars.
But, if you drive a truck or a bus, you may need to choose 25 ft booster cable. Meanwhile, the 12 ft jumper cable is the standard option for sedan users, motorcycles, and other small vehicles.
Basically, these cables can work well as long as the battery source is still reachable. So, it is your decision to choose the length of the cable.
Always choose jumper cables with a unique travel bag
In fact, you can buy jumper cables that do not include travel bags. It means that you only buy the wires.
But, it may be challenging to carry the cable without a carry case. In addition, this bag can also make sure that the jumper cable is stored safely. Water and air exposure may cause the wires damaged easily.
Choose jumper cables that are made from a flexible material
Flexibility is also an essential aspect to consider when choosing jumper cables.
Some jumper cables may not be so flexible, especially if you put in shallow temperature. Meanwhile, some products have excellent flexibility, even when you put it at a superficial heat.
If you choose the flexible one, then it will be easy for you to roll it and store it in its case. Still, you have to check the cable quality so that when you run it, it does not crack on its surface.
To know how to use a jumper cable, visit our tutorial article.
FAQ About Jumper Cable For Your Vehicle
How to know if I need to jump-start my car?
In a particular case, if your car suddenly cannot start but the engine cranks, the battery may be discharged. So, you probably need to jump-start the vehicle. You also need to check the gasoline and make sure your tank is not empty.
When you start your car, but you do not hear the engine sound, it can be due to the discharged battery. If you try to start it over and over, it can cause the battery to run out.
Which cable does refer to positive or negative?
So, most jumper cables use red and black in color. You may wonder which one is the positive cable or the negative?
Well, there is no big idea whether you use the red wire for the positive terminal or the black one. You can use the black cable to connect to either a positive terminal or a negative terminal.
If you connect the red cable to the positive terminal on the source battery, then you also have to connect it to the positive terminal on the dead battery.
The second cable or the black cable is connected to the negative terminal on the source battery and connect the remaining clamps to the car body.
Can I use 2 gauge heavy-duty cable 200A to get power from a truck?
If your sedan is running out of battery while you only have heavy-duty cable 200A with 2 gauge, then you may get the power from a truck source.
But, you also have to keep in mind that the power distributed through the cable should not be more than 200A.
Since you only use 200A heavy duty cable, you have to get it from the same source. It is better if you choose a jumper cable with 4 gauge and 500A heavy duty that can work on any batteries.
How long can a pair of jumper cables last?
Usually, jumper cables can last up to 10 years and even 20 years. Why? It is that because you do not use the jumper cable every. You can buy a jumper cable just in case you need it during an emergency situation.
You have to remember that after you use the jumper cable, you have to store it in its case so that the wire will not crack. You also have to prevent it from sunlight exposure and keep the cable safe in the trunk.
Which one is better between 2 Gauge cable and 4 gauge cable?
You can measure the thickness of the jumper cables wire with a gauge. The lower number means that the fence is thicker. Jumper cables with 2 gauge are more abundant than 4 gauge or 6 gauge cable.
If you choose 6 gauge cable, it means that the cable is smaller or thinner.
So, it is better to choose jumper cables with 2 gauge thickness because it is perfect for heavy-duty.
But, it is not a bad idea to choose 4 gauge cable that is commonly used by many people. There is also a jumper cable that has 1 gauge thickness and good for heavy-duty 800A.
Can I combine 1 gauge thickness cable with a 6 gauge cable?
You are not recommended to combine two different jumper cables with varying thicknesses of wire.
The red cable with 1 gauge wire thickness only fits the black cable with 1 gauge thickness too. It is too dangerous to use two different cables to start your car.
6 gauge thickness is too small or too thin, especially if the power supply is also huge. 1 Gauge is suitable for heavy-duty while 6 measure is not good for heavy-duty.
Can I use an ordinary cable instead of buying a jumper cable?
It is not a good idea to use an ordinary cable to jump-start a dead car battery. It is all about safety because you have no idea whether it is compatible with the battery terminal or not. In addition, you also have to use the right cable that has better thickness.
Electric shock may occur during the jump start when using ordinary cable. Therefore, you are recommended to buy special jumper cables that are specifically designed for a jump start.
What is the best jumper cable brand?
All of those 10 jumper cables are manufactured by the best brands, so you can choose from one of those brands.
Somehow, each brand has its own product with different specifications. Thus, all you need to do is to choose a jumper cable product according to your needs.
If you want to have a pair of jumper cable with a very thick wire, then you can choose Energizer 1-Gauge 800A Heavy Duty Jumper Battery Cables. It is suitable for heavy-duty, and the cord is very thick.
Jumper Cable Do’s and Dont’s
Using a jumper cable can be easy, but you also have to use it correctly. Since you are about connecting your car battery to another battery, it has to be done safely.
There are a few things and facts that you must do, and you must not do about using jumper cables.
Always check the cable before using it
Somehow, since you have not used the jumper cables yet, you have to make sure that the jumper cables are in good condition.
A suitable jumper cable must not have any frays, tears, or any conditions that make the jumper cable malfunction.
The cable should not crack, and the wire must be safe inside the cable coating. If you find a crack, then you have to cover it with plastic or rubber material.
It is also necessary to make sure that the clamps can hold tightly on the terminals and do not fall down.
Don’t let the clams dangle
When you finally use the jumper cable, it is also essential to make sure that the wires do not dangle. You have to ensure that it is charging and holds up the terminal properly.
Cable dangling may cause fire or spark. Keep in mind that you must prioritize safety when using jumper booster cables.
Attach the Cables Correctly
You should attach the clamps of the cable properly. You can put the red cable clamps on the positive terminal, and the black braces are on the negative terminals and on the car body.
You must not attach the negative clamps to another negative terminal of the dead battery because it can cause sparkling.
Don’t jump your vehicle so often
If your car battery is running out, you must not jump start it frequently or continually. Somehow, if you can start the car in the first try, then you have to go to an auto shop to repair or replace the battery with the new one.