HOME | OVERVIEW | HOW-TO | PROFESSOR KOBRÉ | REVIEWS | CONTACT | OUR PIX
say goodbye to ugly flash photos
 
    overview    
     babies     
     family     
      pets      
  scrapbook  
      eBay      
  



   How to use Professor Kobré’s Lightscoop®

First steps to bounce lighting with the pop-up flash on your Olympus, Pentax, Nikon, Canon, Fuji FinePix, Sigma SD14, or Sony 35mm DSLR

GETTING STARTED

Bouncing a pop-up flash with the Lightscoop® requires the most power these little units can produce. The following settings are designed get the maximum light output when bouncing the pop-up flash.

See our troubleshooting page if your pictures are too dark. For more background, see Frequently Asked Questions.

SET UP YOUR CAMERA

  1. Turn on the camera.
  2. On Nikons, set the Exposure Metering pattern of the camera to Spot Meter. This is essential on Nikons. On all others, center-weight average, evaluative, etc., will work.
  3. Set the camera to operate on Manual exposure mode (M) [NOT Manual Focus].
  4. Set the ISO to 800. (With a Nikon D90 or D700, increasing the ISO to 1600 or 3200 allows zooming lenses to longer focal lengths & gives great results.)
  5. Select the widest lens aperture — f2.8, f3.5, or f4.0 depending on your lens.
  6. Set the camera’s shutter speed to 1/200th or 1/160.
  7. Select Flash “on” (front curtain sync) — NO red-eye reduction, slow sync, etc.
  8. Select Flash Exposure Compensation to +1, +2, or +3 depending on your camera and the situation. Do NOT change your camera’s exposure compensation, which is a different setting.
  9. Select TTL (through-the-lens) metering for your flash.

Some camera-specific help:

Nikon: Set Flash Exposure Compensation by pressing the flash button and rotating the front dial to +1, (see manual). TTL is the factory default setting on Nikon. To confirm that TTL is still selected, view the Customs Setting Menu>Built-in Flash>TTL.     Note: The Nikon D40 has a different means of accessing the controls than other Nikons, so the Nikon video tutorial will not be of help to you. If you need detailed instructions on setting up your D40, check out our D40-specific page.

Canon: Set Flash Exposure Compensation to +2 on the “Shooting Settings” menu. (See your camera's user manual).

.

Pentax: Set Flash Exposure Compensation to +1 by turning the rear e-dial to set Flash Mode in the Fn menu (See your camera's user manual)

Sony: Set Flash Exposure Compensation to +1 or more by pressing Menu button on back of camera to bring up the menu on the LCD screen. In section with Camera icon, select Flash Control. Set flash control to Pre-flash TTL. Do not use ADI.

Others: Set the Flash Exposure Compensation to +1 or, if available, +2. (See your camera's user manual).

USE THE LIGHTSCOOP®
IN THESE SITUATIONS

The Lightscoop works great in most home and office situations — rooms with light, neutral-colored ceilings no higher than 8-12 feet or walls no farther than 3-4 feet from the camera.

As when bouncing an external flash, the Lightscoop redirects light from a pop up flash to a ceiling or wall — so there MUST be a surface from which it can bounce. The Lightscoop will not bounce outside. As these comparisons show, neither will an EXTERNAL flash. Outside, there is nothing for the light to bounce from. The same is true in churches, gyms, rooms with cathedral ceilings.


Horizontal Photos

Rooms with light-colored ceilings no higher than 8-14 feet tall.

Vertical Photos Rooms with a light-colored wall no greater than 3-4 feet from camera.
HINT: If you are using a zoom lens with a variable aperture, leave the lens at its widest focal length. For example, if you have an 18-55mm zoom lens, stay at 18mm. If you zoom in, your aperture may change and no longer be at f2.8, f3.5 or f4.

View Professor Kobré’s step-by-step videos on setting up the Lightscoop with your camera.

 

Slip the Lightscoop over the flash in its pop up position.

Slide the foot of the Lightscoop into the camera’s hot shoe.

The internal flash and the electronics in your Nikon, Pentax, Olympus, Fuji FinePix Pro, Sigma, or Canon, aided by the Lightscoop's reflector, will do the rest.
NIKON ALTERNATIVE

Most Nikons have an option for using the pop-up flash on MANUAL, instead of TTL. This setting on the Nikons can push a bit more light from the pop-up flash. The option is in the FULL settings, not SIMPLE.

  1. Turn on the camera.
  2. Press the Menu button on the camera>Custom Menu Setting>Select Wrench Icon>CSM/SetUp Menu>Full>Press OK.
  3. Return to Custom Setting Menu>Select Pencil icon>Built-in Flash>Manual>Full Power>Press OK.
  4. Follow steps 3-8, above.
Join Our Flickr Group
See images everyday people create with Lightscoop & add your own!
See More >

Yes, we ship internationally!

Universal Lightscoops fit the SIX listed camera makers & their models, BELOW.

Canon 7D, 10D, 20D, 30D, 40D, 50D, Rebel XTi, XSi, 400, 450, XT, XTi, T1i, XS, 350D, 500D, 550D, 1000D
Fuji FinePix Pro
Nikon D40, D40x, D50, D60, D70, D70s, D80, D90, D100, D200, D300, D700, D3000, D5000
Olympus E420, E520, E3, E620
Pentax K-7, K10D, K100D, K20D, K200D
Sigma SD14

Sony cameras require a Sony Lightscoop, not a Universal model.

Sony a200, a250, a300, a350, a330, a380, a500, a550, a700

Don’t see your 35mm SLR here? We have not assured its compatibility.
However, as new SLR models of the above brands have come on line, we have found that the Lightscoop to fit when we’ve had the opportunity to test.

We do have a 2-week return policy if you'd like to try the Lightscoop with your camera and return it if it doesn’t work out.

NOTE: If your camera does not have interchangeable lenses, its pop-up flash is not powerful enough to send light to the ceiling and back and still properly expose a picture. Sorry... it's not our fault! Blame it on physics!
As Seen In: lifetime momscnet More >
"));